Similar to
adjusting pilot jet and mixture screw on carburetor vehicles. Decreasing the
light value will add a lower amount of fuel.Increasing light value will add more
fuel.
Mode 2 - Yellow - Acceleration fuel
adjustment
Similar to
raising or lowering the needle on carburetor vehicles. Decreasing the light
value will add a lower amount of fuel. Increasing
light value will add more fuel.
Mode 3 - Red - Full Throttle fuel
adjustment
Similar to
adjusting the main jet on carburetor vehicles. Decreasing the light value will
add a lower amount of fuel. Increasing light value
will add more fuel.
Mode 4 - Green/Blue - Boost or nitrous fuel
adjustment
This function
controls the amount of fuel added for boost and nitrous applications. Decreasing
the light value will add a lower amount of fuel. Increasing light value will add more
fuel.
Mode 5 -Yellow/Blue – Amount of Fuel to be
pulled (except turbo)
This function is the pull fuel mode.It will do a strait fuel pull across the map.
TUNE THIS MODE WITH CAUTION!
Mode 5 Yellow/Blue - Turbo with duel injectors This function controls the amount of fuel added with the secondary injectors
Mode 6 - Red/Blue – Full Throttle RPM switch point
adjustment
This function is the RPM switch point for when the full throttle fuel
addition engages.
Adjustment is
necessary to mostly match different pipes or big bore kits which require
different fueling needs. Decreasing the light value will cause the full throttle
fuel to engage at a lower RPM. Increasing the light value will increase the RPM
it engages.